A freshly wiped anesthesia machine may look ready for the next patient. But appearance cannot tell your team whether a seal is leaking, a valve is functioning correctly, or the vaporizer is delivering accurately.
For veterinary clinics, reliable anesthesia equipment care involves three connected tasks: appropriate cleaning, checks before patient use, and scheduled professional servicing. Each addresses a different part of equipment readiness.
Start with the right cleaning approach
AAHA’s Trends article, “Anesthesia component cleaning considerations: Soak, hang, swing, toss,” highlights the uncertainty surrounding veterinary breathing-circuit cleaning. Component materials, circuit design, and single-use labelling all affect what is appropriate.
A method suitable for one breathing hose may damage another. Coaxial circuits, including Bain circuits, need particular care: swinging them to remove water can disconnect the inner tubing. Cleaning agents and incomplete rinsing can also introduce unwanted residue.
Identify each component and follow its manufacturer’s instructions. Do not assume that every hose or reservoir bag can be soaked, disinfected, autoclaved, or reused. A clinic’s written protocol should address cleaning, drying, inspection, storage, and replacement, with clinical oversight for infection-control decisions.
A clean machine still needs a functional check
The AAHA Anesthesia and Monitoring Guidelines recommend leak testing the anesthesia machine and breathing circuit before each patient and after breathing-circuit components are changed. This matters after cleaning, when parts may have been disconnected and reassembled.
Follow the procedure specified for your machine and circuit. A successful leak test is one part of preparation; it does not establish that every valve, gauge, oxygen supply component, or vaporizer is functioning correctly.
Your team also needs a consistent equipment checklist covering oxygen availability, connections, circuit assembly, carbon dioxide absorbent, and waste-gas scavenging. Scheduled servicing supports these daily routines; the clinic still needs to perform its checks before use.
What should professional anesthesia machine servicing cover?
The service scope should match the machine’s design, manufacturer’s requirements, and condition. When arranging an appointment, ask whether the assessment includes:
- Leaks and seals: Breathing-system connections, hoses, reservoir bags, absorber-canister seals, and other relevant leak points.
- Valves and pressure indication: One-way valves, the adjustable pressure-limiting or pop-off valve, and the pressure manometer.
- Oxygen delivery: Supply connections, flowmeter operation, and applicable controls.
- Scavenging: Connections and function of the installed waste-anesthetic-gas disposal arrangement.
- Wear and service records: Components requiring replacement, test findings, repairs completed, and outstanding recommendations.
Agree on the scope beforehand so your clinic knows what was inspected, what was tested, and what needs separate attention. A useful service report gives your team a clear basis for follow-up.
Vaporizer verification and calibration are different services
Ask what is included when a service description says “vaporizer checked.” An output verification measures performance under the conditions tested. It does not, by itself, mean that the vaporizer has been internally serviced or recalibrated.
Manufacturer or appropriately qualified specialist servicing may involve disassembly, internal cleaning, replacement of specified parts, adjustment, and calibration under controlled conditions. The vaporizer’s manufacturer determines the appropriate process.
Keeping this distinction clear helps clinics plan maintenance and understand their service documentation.
How often should equipment be serviced?
Use the schedule for the specific machine and vaporizer. For example, Midmark’s published maintenance chart specifies annual vaporizer servicing and calibration, alongside checks before surgery and other scheduled maintenance. That schedule should not automatically be applied to every brand or component.
Do not wait for the next scheduled visit if equipment fails a pre-use check. Remove the affected equipment from clinical use until the problem is assessed and resolved. Report intermittent faults as well, including what happened and which machine, circuit, or accessory was involved.
Anesthesia equipment service in British Columbia
West-Jan Equipment Services Inc. supports veterinary clinics with anesthesia equipment preventive maintenance, leak testing, troubleshooting, repairs, and documented service findings.
Whether your clinic needs routine maintenance or help with a recurring equipment concern, we can discuss the machine, its service history, and the appropriate next step.
Arrange anesthesia equipment service: Call 236-412-1610 or email sales@west-jan.com.
Serving veterinary clinics in Surrey, the Lower Mainland, Vancouver Island, and the Okanagan.
This article addresses equipment care. Follow the instructions for your specific equipment and your veterinary team’s clinical and infection-control protocols.

